招聘时间:10月18日 18:30
招聘地点:信息学馆A112
注明:由于场地资源有限,为保证招聘活动安全有序进行,东大本校学生可凭本人东大学生证优先入场。若招聘现场仍有容纳空间,根据实际情况,将允许部分外校学生入场
大陆集团2018校园招聘正式启动!
大陆集团2018校园招聘强势来袭!
多个城市多类职位虚位以待,我们诚挚期待你的加入!
招募城市:
上海、常州、长春、连云港、重庆、宁海、三门、常熟、天津等
招募职位:
Software Engineer / 初级软件工程师-发动机系统
Job description |
> Design and simulate the embedded software module and subsystem according to requirement > Execute documents and tests > Support analysis and correction issues > Communicate properly (internal and external) and share knowledge |
Job requirements |
>Bachelor's degree or above, major in Electronics, Mathematics, Computer Science or Automotive related > Specialized in C programming language, knowledge in embedded software development > Good logical thinking and problem solving skills > Good command of both oral and written English |
|
System Engineer / 初级系统工程师-传感器与执行器
Job description |
> Build sample and test for Design verification and validation > Create and verify BOM, Specification > Support on Running Production > Benchmark > Solve the issues on Design Validation/ Production Validation/ Customer Return |
Job requirements |
> Bachelor's degree or above, major in Automotive Engineering or other related > Good understanding of automotive engineering > Good knowledge in engine management systems > Good communication skills > Good intercultural competence and willingness to work in international team > Good command of both oral and written English |
|
Software Engineer / 初级软件工程师 - 被动安全与传感器
Job description |
> Responsible for embedded software development for Passive Safety Control Unit > Perform software component requirements engineering, design, coding and test > Deliver output according to process, quality and timing |
Job requirements |
> Bachelor's degree or above, major in Electronics and Communication, Computer Science, Signal Processing, Mathematics or other related > Embedded software development experience is preferred > Good command of both oral and written English > Team spirit |
|
Algorithm Engineer / 初级算法工程师 - 被动安全与传感器
Job description |
> Complete Algorithm application and development for airbag control unit, based on Asia customer (China, Japan, Korea) requirements, according to defined processes and guidelines > Fulfill the time and quality requirement for projects |
Job requirements |
> Bachelor's degree or above, major in Electronics and Communication, Computer Science, Signal Processing, Mathematics or other related > Algorithm development experience is preferred > Good command of both oral and written English > Team spirit |
|
Electronics Engineer / 初级电子工程师 - 被动安全与传感器
Job description |
> Responsible for analog and digital circuit development for Passive Safety Control Unit > Perform hardware requirements engineering, component selection, circuit design and test > Deliver output according to process, quality and timing |
Job requirements |
> Bachelor's degree or above, major in Electronics and Communication, Automation or other related >Electronics product development experience is preferred > Good command of both oral and written English > Team spirit |
|
Test Engineer / 初级测试工程师 - 被动安全与传感器
Job description |
> Complete system test based on customer requirements, according to defined processes and guidelines > Test automation program for airbag control unit functions test against customer requirements > Build up the airbag control unit functions test environment |
Job requirements |
> Bachelor's degree or above, major in Electronics and Communication, Computer Science, Automation or other related > Test experience of electronics proudct is preferred > Good command of both oral and written English > Team spirit |
|
EMC Test Engineer / 初级EMC测试工程师
Job description |
> Perform EMC test for automotive electronics products > Support schedules to ensure projects meet customer timing requirements and corporate quality expectations |
Job requirements |
>Bachelor's degree or above, major in Engineering or other related > Theoretical & practical experience in EMC testing topics (test methods, equipment, certifications) > Equipment maintenance and calibration requirements > ISO/IEC 17025, Customer Recognition Programs, and Customer Standards/Specifications > Good command of both oral and written English > Able to accept the 2 shifts model, 1st shift: 8:00 to 17:00, 2st shift: 17:00 to 12:30(AM) |
|
EMC Validation Engineer / 初级EMC验证工程师
Job description |
> Support schedules to ensure projects meet customer timing requirements and corporate quality expectations > Write EMC test plan |
Job requirements |
> Bachelor's degree or above, major in Engineering or other related > Theoretical & practical experience in EMC testing topics (test methods, equipment, certifications) > Equipment maintenance and calibration requirements > ISO/IEC 17025, Customer Recognition Programs, and Customer Standards/ Specifications > Good command of both oral and written English > Work experience in automotive electronic quality industry > Able to accept the 2 shifts model, 1st shift: 8:00 to 17:00, 2st shift: 17:00 to 12:30(AM) |
|
Electronics Design Engineer / 初级电子设计工程师 - 传感器与执行器
Job description |
> Responsible for electrical circuit design and simulation > Responsible for PCB layout and sampling > Responsible for FMEA and reviews > Responsible for electronic component selection & release > Responsible for EMC / EMI specification, test > Responsible for electronic test > Responsible for electronic failure analysis |
Job requirements |
> Bachelor's degree, major in Electronics, Communication or other related > Good communication skills > Good command of both oral and written English > Skilled at electronic equipment (multimeter, oscilloscope…) |
|
Mechanical Design Engineer / 初级机械设计工程师 - 被动安全与传感器
Job description |
> According to customer requirement to do 2D and 3D drawing use CATIA tool > Cooperate with PM and sales to acquisition for technical side > Support SQM to localization components > Cooperate well with team member |
Job requirements |
> Master's degree, major in Engineering, Mechanical Engineering or other related > Be familiar with Design Tools such as Auto-CAD / CATIA for 2d, 3d design > Understanding of the automotive new product development process such as TS16949, PPAP, FMEA, 8D > Experience to work with international project team as intern > Good command of both oral and written English > Good communication skills |
|
Order Management / 初级客户订单管理 - 车身与安全
Job description |
> Dispatch customer orders/primary requirements and where necessary production-synchronous call down into production, in order to ensure 100% supply to customers, taking due account of production resources and processes, safeguard production line no stop caused by material shortage or planning problem > Ensure to get customer forecast timely and attend VRM in time regularly. Focus on short term and long term system planning quality, driving to find CDP problem and feedback to CDP planner and coordinate with Sales to make sure local planning figure correct > Make sure assigned report could be fulfill in time and ensure reporting quality. Logistic report include Sales report/CDP forecast/inventory analysis etc > Be Logistic interface to customer to reflect fast to customer request or distribute information to team if necessary to avoid information transfer delay; coordinate in project team for logistic related issue > Monitor the stock levels and coverage of finished goods and corrective action if necessary, in order to achieve optimum inventory levels with due regard to the Total Cost approach > Monitor the delivery date and dispatching for finished goods in optimum time, in order to ensure timely dispatch and delivery reliability to the customer with best cost, controlling premium cost to minimum. Timely evaluation on forwarder’s performance and feedback to central Logistic for service improvement > Monitor 3rd PL warehouse (if related) daily to ensure customer demand could be fulfill in time, Timely evaluation on 3rd PL warehouse's performance and feedback to central Logistic for service improvement > Work on introduction and phase-out project teams, in order to ensure a timely introduction and phase-out of finished goods. Ensure no idle material caused by planning and highlight idle risk before every case happen |
Job requirements |
> Bachelor's degree or above, major in Logistics or English > Good communication skills > Good command of both oral and written English |
|
Process Engineer / 初级工艺工程师 - 发动机系统
Job description |
> Define concept of new production equipment or upgrade of existing lines, in agreement with company strategic targets (technology roadmap, production capacity, and investment targets) > Responsible for OEE and FPY of new equipment introduced in production to meet plant targets > Exchange continuously information with Product development (e.g. new products, DTC) Project managers (e.g. Projects timing) Quality manager (8D support, scrap reduction) FF Head (e.g. Increase productivity) > Develop alternative and innovative manufacturing processes through research, cooperation with universities and suppliers, with the target to improve and optimize processes productivity and quality > Promote synergies within worldwide industrial engineering sharing know how, knowledge and experiences in order to reduce process R&D costs > Define process and equipment requirements for the new products and FMEA review |
Job requirements |
> Bachelor's degree or above, major in Mechanical and Electronic background > Experience in high precision assembly or test for automation industry is preferred > Good understanding of automotive engineering > Good communication skills > Good intercultural competence and willingness to work in international team > Good command of both oral and written English |
|
Maintanence engineer / 初级维修工程师 - 发动机系统
Job description |
> Ensure the best performance of all the lines, in terms of down time, cost of maintenance, and recovery time of fixing technical issues on the line > Daily maintenance activities, trouble shooting on the line, etc > Equipment preventive and predictive maintenance. Prepare and update maintenance plan > Responsible for equipment calibration, complicated repair > Coach technician for maintenance related activities, such as: know how, and TPM > Cooperate with process quality improvement > Spare parts management, such as: plan, record, etc.; control the cost of spare parts |
Job requirements |
> Bachelor's degree or above, major in Mechanical and Electronic background > Experience in high precision assembly or test for automation industry is preferred > Good understanding of automotive engineering > Good communication skills > Good intercultural competence and willingness to work in international team > Good command of both oral and written English |
|
Maintanence engineer / 初级维修工程师 - 发动机系统
Job description |
> New project (equipment Installation, internal transfer from process to maintenance, maintenance plan) > Learn new machine technology, new process technology, new test method > Prepare spare part on time > Implement pre-maintenance level C and instruct level A, B > Responsible for troubleshooting fast solving, reduce downtime and reduce product scrap. (Analysis, action plan, result review) > Equipment improvement: according to downtime, FPY, OEE, 5S of related equipment > Coach maintenance junior engineer and technician > Support process team (New project: Concept, lessons learned, Process troubleshooting) |
Job requirements |
> Bachelor's degree or above, major in Mechanical, Electronic or other related > Computer skill, Equipment Technology: Test (Venturi, ICT, Testbay, IPC, Printer, Scanner), Assembly (Dispensing, Pressfit, Crimping, Oven, Screwing), SMT technology > Test method, PLC, VB, VC, C++ Programming, Automatic control (Servo, CNC), AOI > Quality tools - PFMEA, DOE, MSA, PPCA, 8D, etc > TPM |
|
Product Quality Management Engineer / 初级量产产品质量工程师 - 传感器及执行器
Job description |
> Responsible for customer quality management include 0km and field > Customer audit management > Responsible for production quality control and ensure the production operation on right way > Responsible for the data analysis and quality reporting > Change management control and communication with customer > Responsible for material issue handling in the production line > Support the project team since G80 to G90 > Ensure product re-qualification |
Job requirements |
> Bachelor's degree or above, major in Industry Engineering > Good command of both oral and written English > Knew well for the 5 Quality Tools |
|
Project Quality Management Engineer / 初级项目质量管理工程师 - 发动机系统
Job description |
> Launch development and production that will allow to have a flawless production and to meet customer quality expectations • Arrange all quality related and safety aspects during the development & launch process are covered (internal, supplier and customer) as described in the corresponding development procedure in cooperation with the PM. In case of deviations make sure the appropriate corrective actions are taken > Pursue required methods in a project are implemented according to Project Plan/Quality Plan, which includes Quality Gates, APQP, Launch Readiness, Knowledge Management • Guarantee Continental flawless launch related to any topic of Fuel Rail delivered by external supplier • Supplier feasibility commitment, APQP supplier activities, supplier safe launch plan implementation related to the Fuel Rail of assigned projects |
Job requirements |
> Bachelor's degree or above, major in Mechanical Engineering, Automation, Auto Science or Material > Good command of both oral and written English |
|
申请方式:
统一采取网申的形式,网申地址:
http://campus.51job.com/continental/
或扫描下方二维码,登陆校招手机平台:
关于大陆集团
大陆集团致力于为人员交通和货物运输发展智能科技。 作为可靠的国际性汽车零部件供应商、轮胎制造商及工业领域合作伙伴,大陆集团提供可持续、安全、舒适、个人及经济适用的解决方案。2015年, 大陆集团在底盘与安全、车身电子、动力总成、轮胎及康迪泰克五大事业部的共同努力下,初步销售额约为 405亿欧元。集团在全球员工数量约有 22.7 万名,遍及 56 个国家和地区。1994年,大陆集团正式进驻中国市场并在中国与主要客户建立了成功的合作关系。目前,大陆集团在中国共设有27 处生产基地、17研发中心,员工总数超过25,000名,大陆集团五大事业部为中国市场提供定制化的解决方案。
大陆集团中国区雇主品牌团队
所属话题:给问题添加话题有助于更快获得解答